Waterworks .25 Wall Mounted Tub Spout Uživatelský manuál stáhnout pdf

"Ø

Installation Guidelines

W A T E R W O R K S

Waterworks is a registered trademark of Waterworks Inc.

04.11.07

.25 Wall Mounted Tub Spout

PTTU82

These guidelines have been prepared for the professional contractor to aid in the installation of:

.25 WALL MOUNTED TUB SPOUT (PTTU82) All dimensions are based on origin specification

and are subject to change and variation. Please consult your Design Associate for current specifications.

6. The face of the adapter (1) requires being 1

" from

the finished wall, see figure 1.

7. After verifying fit, make sure the mark made in step 4

remains at 12:00 then sweat the spout adapter (1)

onto the copper. If it is not aligned, the spout will not

thread on completely and cause a leak or not align

properly so the tip points down at 6:00.

8. Allow the adapter to cool then slide the escutcheon

(3) onto the adapter.

9. Thread the spout onto the adapter making sure the

washer (4) is in place.

10. Remove aerator using tool provided.

11. Turn on the supplies to check leaks and verify

proper function.

12. Reinstall aerator.

If further assistance is required, please contact

Product Support at 1-800-927-2120 (8am-7pm EST).

IMPORTANT

To ensure this product is installed properly, you must

read and follow these guidelines.

The owner/user of this product must keep this

information for future reference.

Be sure your installation conforms to local codes.

This product must be installed by a professional

contractor.

Inspect this product to assure you have all parts

required for proper installation.

Use only a strap wrench or protected/smooth-jaw

wrench on any finished surface

INSTALLATION:

1. Install

" supplies for optimum flow and stub-out a

section of

" copper.

2. After the finished wall is complete, cut the copper so

it protrudes

" from the surface of the finished wall.

3. Unpack the spout and verify the spout adapter (1) is

threaded completely into the spout.

4. To verify alignment of the spout and adapter, make a

mark at 12:00 that extends from the spout onto the

adapter.

5. Unthread the adapter from the spout then slide the

adapter onto the copper.

FIGURE 1

Finished Wall

"Ø Copper

1 2

Installation Guidelines 1

Shrnutí obsahu

Strany 1 - Installation Guidelines

258"Ø918"Installation GuidelinesW A T E R W O R K SWaterworks is a registered trademark of Waterworks Inc.04.11.07.25 Wall Mounted

Strany 2

Installation GuidelinesW A T E R W O R K SWaterworks is a registered trademark of Waterworks Inc..25 Wall Mounted Tub SpoutPARTS TABLEITEM NO

Komentáře k této Příručce

Žádné komentáře

Waterworks .25 Wall Mounted Tub Spout Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro vodu Waterworks .25 Wall Mounted Tub Spout. Waterworks .25 Wall Mounted Tub Spout User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství pro vodu Waterworks .25 Wall Mounted Tub Spout